13
• DO NOT WEAR LOOSE CLOTHING OR JEWELERY. KEEP HAIR AND
CLOTHES AWAY FROM MOVING PARTS BECAUSE THEY MIGHT BECOME
TANGLED.
• PREVENT ACCIDENTAL STARTING OF THE APPLIANCE: MAKE SURE THE
POWER SWITCH IS SWITCHED OFF BEFORE PLUGGING IN THE POWER
TOOL OR BATTERY.
• BEFORE STARTING A POWER TOOL, REMOVE THE WRENCHES OR
ADJUSTMENT TOOLS.
• ALWAYS MAINTAIN A GOOD BALANCE, DO NOT LEAN TOO FAR, AND
AVOID UNSAFE POSITIONS WHILE USING A POWER TOOL.
• USE THE TOOL SUITABLE FOR THE WORK TO BE PERFORMED AND
CHOOSE ACCESSORIES AND TIPS TAKING INTO ACCOUNT THE WORKING
CONDITIONS AND THE WORK TO BE COMPLETED.
• ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET OR THE
BATTERY BEFORE RE-ADJUSTING, STORING OR REPLACING THE AP-
PLIANCE ACCESSORIES.
• SUBJECT THE POWER TOOLS TO THE NECESSARY MAINTENANCE PRO-
CEDURES. MAKE SURE THAT THE MOVING PARTS ARE WELL ALIGNED
AND THAT THERE ARE NO BROKEN COMPONENTS THAT CAN COMPRO-
MISE THE CORRECT OPERATION OF THE INSTRUMENT.
• KEEP CUTTING TOOLS CLEAN AND SHARP
WARNING! ADDITIONAL SAFETY NOTICES
• HOLD THE POWER TOOL BY GRASPING THE INSULATED HANDLE IF
THERE IS A POSSIBILITY THAT IT CAN COME INTO CONTACT WITH HIDDEN
ELECTRICAL WIRES.
• USE ONLY AUXILIARY HANDLES SUPPLIED WITH THE POWER TOOL.
• USE CLAMPS AND PRACTICAL METHODS TO FIX AND SUPPORT THE
WORKPIECE ON A STABLE PLATFORM.
• BEFORE SCREWING SCREWS INTO THE WALLS, FLOORS AND CEILINGS
CHECK THE LOCATION OF WIRES AND PIPING.
• EVEN WHEN THE TOOL IS USED AS PRESCRIBED, IT IS NOT POSSIBLE
TO ELIMINATE ALL RISK FACTORS. THE FOLLOWING RISKS MAY ARISE
FROM THE CONSTRUCTION AND DESIGN OF THE TOOL:
1.DAMAGE TO THE LUNGS IF AN EFFECTIVE ANTI-DUST MASK IS NOT
WORN.
2.HEARING DAMAGE IF EFFECTIVE HEARING PROTECTION IS NOT
USED.
3.HEALTH DEFECTS RESULTING FROM VIBRATION IF THE ELECTRI
