15
MAINTENANCE AND SAFETY.
PACKAGE
In this package you will find a variable speed and reversible
(for use as screwdriver) electric hammer drill.
The drill is equipped with a double-shielded cable which ma-
kes it safe during use.
SPINDLE:
HOUSING 13mm
POWER:
500 WATT
SPEED:
0-3000 REVS
WEIGHT:
1.8 Kg
Before activating the drill, make sure that the trigger lock is off and that the power cord is in perfect condition.
Always check that the spindle is tight before each work and all functions are smooth for the work you plan to
carry. Do not use in damp locations.
During work, wear protective gloves and goggles.
After use, clean the drill without using solvents or other chemicals, disassemble the tip from the spindle and place
it in the appropriate container. Do not use plastic bags or envelopes to store the drill, as the formation of moisture
may damage the engine. Do not overload the drill; let it rest after 5 minutes of continuous work. Do not force the
tool beyond its features . Respect for these rules will prolong the life of your power tool.
IF YOU NEED TO DISCARD THE OLD DRILL DO NOT DISCARD THE PIECES IN THE ENVIRONMENT. IF YOU
HAVE THE POSSIBILITY, DISASSEMBLE THE PIECES AND DISCARD THEM IN APPROPRIATE CONTAINERS
FOR RECYCLING. THESE INSTRUCTIONS ARE ALSO VALID FOR THE MODEL WITHOUT ACCESSORIES
KEEP OUT OF REACH OF CHILDREN
ASSEMBLY AND FUNCTIONALITY
MOUNTING THE HANDLE
1) Unscrew the screw.
2) Insert the handle from the spindle side.
3) Tighten the screw.
4) Widen the butterfly retainer, insert the ruler into the hole at the base of the handle.
VARIABLE SPEED
The drill is equipped with a speed control located on the drill switch. Rotate it towards right or left to increase or
decrease the speed of rotation. The rotation speed can also be adjusted based on the pressure applied on the
drill trigger.
If you have to work for a long time, the drill is equipped with a lock to keep the tool running without having to exert
a constant pressure on the trigger. The locking switch is on the side near the trigger.
To activate it, press on the drill trigger and press the lock. To disable it, press the lock again.
HAMMER ACTIVATION
To activate the hammer drill function, press the button on the drill body. To disable it, press the button again on
the opposite side of the body.
REVERSIBILITY FUNCTION
The reversible lever is placed above the drill trigger. Move it toward the side to which the spindle is to be rotated.
Right turn put lever to the right; left turn put lever to left.
