14
15
PLATE.
•
ONLY CONNECT THE APPLIANCE TO THE POWER OUTLETS WITH
A MINIMUM CAPACITY OF 10 AMPERES.
•
DO NOT PULL THE POWER CORD OR THE APPLIANCE ITSELF TO
REMOVE THE PLUG FROM THE WALL SOCKET.
•
FULLY UNWIND THE POWER CORD BEFORE OPERATING THE AP-
PLIANCE.
•
USE AN ELECTRIC EXTENSION CORD ONLY IF IT IS IN PERFECT
CONDITION.
•
NEVER LET THE POWER CORD RUN THROUGH SHARP EDGES;
AVOID CRUSHING IT.
•
DO NOT LEAVE THE APPLIANCE EXPOSED TO ATMOSPHERIC
AGENTS (RAIN, FROST, SUN, ETC.).
•
NEVER USE THE APPLIANCE:
- WITH WET OR MOIST HANDS;
- IF IT HAS FALLEN AND HAS OBVIOUS RUPTURES OR MALFUNC-
TIONS;
- IF THE PLUG OR POWER CORD DEFECTIVE;
- IN HUMID OR GAS SATURATED ENVIRONMENTS.
•
DO NOT COVER THE APPLIANCE WITH TOWELS, CLOTHING, ETC.
•
PLACE THE APPLIANCE ONLY ON HORIZONTAL AND STABLE
SURFACES, AWAY FROM SHOWERS, BATHTUB, SINKS, ETC.
•
IF THE APPLIANCE IS WET OF GETS IN CONTACT WITH WATER,
DO NOT USE IT AND HAVE IT CHECKED BY A SPECIALISED LABO-
RATORY.
•
ALWAYS REMOVE THE MAINS PLUG FROM THE POWER SUPPLY
IMMEDIATELY AFTER USE AND BEFORE PERFORMING ANY CLEAN-
