16
COMPONENT IDENTIFICATION & CONTENT CHECK LIST
Main Components
1.push rod
2.feed tube
3.rotating propeller
4. filter
5.outer cup
6.Switch
7.Body
8.Base
9. Product juice cup
10.Slag cup
NOTE: Do not pre-operate before inputting materials or do not operate
with an empty bowl.
IMPORTANT:
The hopper edge must point to close sign on the base
in order for the machine to operate properly.
ASSEMBLY INSTRUCTIONS
IMPORTANT:
Prior to Assembling the juicer please check this point:
At the base of the bowl there is a rubber stopper. When in place the
stopper ensures all of the juice only exits via the juice outlet. Before
Juicing always ensure that the rubber stopper is firmly in place.
1. Assemble the bowl on the base.
- . Make sure the bowl is all the way into the shaft of the base.
2. Insert the strainer into the spinning brush. Align the red dot on the
strainer with the red dot on the bowl and insert strainer spinning brush
into the bowl. When the dots are correctly aligned the strainer spinning
brush will lock in place.
3. Insert the squeezing screw into the strainer and turn until it drops
into position.
4. Assemble the hopper onto the bowl.
- Align the small arrow on the hopper with the red dot on the bowl.
- Twist the hopper so that the plastic tab with the arrow on it points
to
the closed sign on the base.