15
PARTS
HOW TO USE
1)
Doser
2)
Lid
3)
Insulated aluminium
compartment for pop corn
s
4)
Spout
5) External
structure
6)
Switch
•
Place the appliance on a flat, stable and non-slip surface.
• It is recommended to wipe the machine and the accessories with a
damp cloth before the first use
• Use the doser in order to insert the corns in the machine. One full doser
for each cooking session is enough in order to not overload the appliance
and to avoid damages
• Insert the corns in
to
the insulated aluminium compartment with the
popcorn
doser
• Place the doser on top of the lid
• Place a big bowl under the spout so that the bowl edge touches the
external
structure of the appliance. It is important that popcorns fall in the
bowl in order
not
to block the opening
• Switch on the appliance. After
a
few seconds, popco
r
ns start going
out
from the spout until they all pop. It will take about 3 minutes
• When the corns stop popping, switch off the machine and unplug it
•
If you notice some popcorns ramaining in the thermal compartment,
you can take them by using a wooden spoon. Pay close attention while
doing this and always wear an oven mitt in order to prevent from any
burns.
• Never put butter in the insulated aluminium compartment
NOTE:
W
ait 10-12 minutes before using the appliance again.
1
2
3
4
5
6
