15
RISK OF ELECTRICAL SHOCK!
• THIS APPLIANCE IS DESIGNED TO OPERATE
ONLY WITH ALTERNATING CURRENT. BEFORE
OPERA- TING, MAKE SURE THAT THE VOLTAGE
CORRE- SPONDS TO THE ONE INDICATED ON
THE DATA PLATE.
• ONLY CONNECT THE APPLIANCE TO THE
POWER OUTLETS WITH A MINIMUM CAPACITY
OF 10 AMPERES.
• DO NOT PULL THE POWER CORD OR THE AP-
PLIANCE ITSELF TO REMOVE THE PLUG FROM
THE WALL SOCKET.
• FULLY UNWIND THE POWER CORD BEFORE
OPERATING THE APPLIANCE.
• NEVER LET THE POWER CORD RUN THROU-
GH SHARP EDGES; AVOID CRUSHING IT.
• DO NOT LEAVE THE APPLIANCE EXPOSED
TO ATMOSPHERIC AGENTS (RAIN, FROST, SUN,
ETC.).
• NEVER USE THE APPLIANCE:
- WITH WET OR MOIST HANDS;
- IF IT HAS FALLEN AND HAS OBVIOUS RUPTU-
RES OR MALFUNCTIONS;
- IF THE PLUG OR POWER CORD DEFECTIVE;
- IN HUMID OR GAS SATURATED ENVIRONMEN-
TS.
• DO NOT COVER THE APPLIANCE WITH
TOWELS, CLOTHING, ETC.
• PLACE THE APPLIANCE ONLY ON HORI-
ZONTAL AND STABLE SURFACES, AWAY FROM
