26
HYGIENICAL MAINTENANCE OF THE TRIMMER
Oil the trimmer’s teeth every six months with a very small quantity of
sewing machine oil.
DAILY CLEANING
Make sure the shaver is switched off and unplugged.
Press the release button on the front of the device to remove the heads
from the main body. Wash the shaving heads with warm water.
Put the shaving heads back in position.
WEEKLY CLEANING
First of all, carry out the daily cleaning operations.
Press the release button on the front of the device to remove the heads
from the main body. Turn the fasteners counter-clockwise to release
the inner blade support. Detach the inner blade support and the inner
blades. Use a little brush to remove carefully the hairs from the inner
and outer blades, then rinse to remove any residues.
Put the inner blade back in position. Place the inner blade support on
the hair compartment and lock it by turning the fasteners clockwise
until it snaps into position.
WARNING:
Never immerse the appliance in water.
Water to clean the shaving unit should not exceed 70°C.
WARNING:
Unplug the shaver before cleaning.