background image

4

V. Principles of Operation

The main component of the heat exchangers is counterflow aluminum element through
which heat transfer occurs.
Ambient blower draws ambient air from the bottom inlet through an aluminum mesh air
filter, through the element and exhaust it through a discharge grill.
Cabinet blower draws cabinet air from the top inlet through the element and exhaust it
through the bottom discharge into the cabinet.

VI. Specific Model Data

Blower

Ambient Air

with

Heat Load

Heat

Exchanger

Cooled Air

Cabinet

Blower

Heated Air

Ambient

Air

In an Air-to-Air Heat
Exchanger, heat from air
surrounding the compo-
nents is removed by a
specially designed heat
transfer element before
being routed back into the
enclosure.

Major Component Replacements

KNHX38

KNHX47

KNHX59

KNHX38E

KNHX47E

KNHX59E

Condenser Blower Assembly

6015-00-129

6015-00-129

8060-00-11

Condenser Blower Capacitor

0452-06

0452-06

0452-03

Condenser Blower Blower Motor

0261-08

0261-08

0261-149

Evaporator Blower Assembly

6015-00-129

6015-00-129

604559-00-36

Evaporator Blower Capacitor

0452-06

0452-06

0452-03

Evaporator Blower Blower Motor

0261-08

0261-08

0261-149

Filter

10871F

10871F

10871F

Above parts are for 115V units.  For 230V, consult factory.

Technical Data

**

KNHX38

115

3.00

340

160

131

44

88

115

KNHX38E

115

3.00

340

160

131

44

88

115

K2NHX38

230

2.10

440

160

131

46

92

115

K2NHX38E

230

2.10

440

160

131

46

92

115

KNHX47

115

3.00

340

160

131

54

108

135

KNHX47E

115

3.00

340

160

131

54

108

135

K2NHX47

230

2.10

440

160

131

56

112

135

K2NHX47E

230

2.10

440

160

131

56

112

135

KNHX59

115

4.50

400

160

131

65

130

170

KNHX59E

115

4.50

400

160

131

65

130

170

K2NHX59

230

3.30

660

160

131

65

130

170

K2NHX59E

230

3.30

660

160

131

65

130

170

Maximum Allowable

Performance

Approx.

Power

Temperature °F

Watts/°F

Weight

Model

Volts

Amps

Watts

Enclosure Ambient

Air In

Air Out

(lbs.)

**60 Hz. operation. For 50 Hz. operation, consult Kooltronic.

Summary of Contents for KNHX38 Series









Reviews: