Page 7 of 12
Operating the Koolmist 300
1.
Remove the Koolmist 300 from the packaging taking care to retain any
separately packed components.
2.
Check and remove any temporary packing or security tape used to protect
the unit during transit.
3.
Insert CR2032 button cell battery (not supplied) into the remote control.
4.
Confirm the paper cooling pad and air filter are correctly assembled in the
unit.
5.
Check the power cord for any damage. If the power cord is damaged do not
use the unit and contact an authorised service agent for guidance.
6.
Fill the Koolmist 300 with water or ice cubes through the top flap as shown
below taking care not to overfill the unit. Alternatively, the water tank can
also be filled by removing the top of the unit as shown in the maintenance
section.
