• 7 •
ADJUSTING THE SENSITIVITY
1. Set the sound selector to “Audible”. This will lower the tone
frequency and you can hear the tone.
2. Place the unit away from you and listen. If you do not hear the tone
each time you hear barking, adjust to a high sensitivity level, or
place the unit closer to the dog. If you hear the tone without hearing
the barking, adjust to a lower sensitivity level.
3. When you have adjusted the sensitivity level, reset the Sound
Selector to “Ultrasonic”.
NOTE:
• Ensure that background noise level is not too high or it will cause
continuous triggering. You can correct this by lowering the sensitivity
level.
• Try to use the lowest possible sensitivity setting that will respond
consistently to barking. If it is set too high, other sounds may trigger
the unit. The “Novel Stimulus” aspect of the tone will be lost and
your dogs will learn to ignore the Super Bark Free.
• Do not try to instigate barking from your dog to find out if Super Bark
Free will stop them from barking. A dog will always bark if harassed.
RÉGLAGE DE LA SENSIBILITÉ
1. Réglez le sélecteur de son sur «Audible». Ceci réduit les fréquences
ultrasons pour que vous puissiez entendre le son.
2. Éloignez-vous de l’appareil et écoutez. Si vous n’entendez pas
le son chaque fois que vous entendez les aboiements, augmentez le
degré de sensibilité ou rapprochez l’appareil du chien. Si vous
entendez le son sans avoir entendu d’aboiements, réduisez le degré
de sensibilité.
3. Une fois le degré de sensibilité réglé, remettez l’appareil en mode
«Ultrasons».
REMARQUE :
• Veillez à ce que le bruit de fond ne soit pas trop élevé ou les ultrsons
seront déclenchés constamment. Il est possible de remédier à ce
problème en réduisant le degré de sensibilité de l’appareil.
• Essayez d’utiliser le degré de sensibilité le plus bas possible qui
réponde de manière constante aux aboiements. Si le degré de
sensibilité est réglé trop haut, d’autres sons pourront déclencher les
ultrasons. L’effet de surprise du dispositif sera supprimé et les chiens
apprendront à ne pas tenir compte des ultrasons.
• N’incitez pas votre chien à aboyer pour vérifier si l’émetteur Super
Bark Free va le faire arrêter d’aboyer. Un chien aboie toujours s’il est
harcelé.
SETTING THE TIMER
Just set the Timer once and the preset ON/OFF time will
be repeated daily. When the pre-set time arrives, the unit
will turn ON/OFF automatically. It can be shown on the
Green LED power indicator. Repeat the following steps to set the Current
Time > Timer “ON” Time > Timer “OFF” Time respectively.
1.
Press and hold MODE key to enter setting mode.
2.
You need to set up the current time first. At the timer setting mode,
the hour digits will start flashing.
3.
Press UP key to adjust the hour value and press MODE to confirm.
4.
After confirming the hour value, the minute digits
will start flashing. Press UP key to adjust the minute
value and press MODE to confirm.
5.
After confirming the current time setting, it will automatically
switch to Timer On setting.
6.
Repeat step 3 and 4 to set the desired Timer “ON” setting.
7.
After confirming the Timer “ON” setting, it will
automat ically switch to Timer “OFF” setting.
8.
Repeat step 3 and4 to set the desired Timer “OFF”
setting.
NOTE:
• In Timer ON/OFF setting, you will see a “ON/OFF” signal shown at
the top/bottom right corner of the LCD display.
• 8 •
9.
When the timer ON/OFF time arrives, the main unit
will be turned ON/OFF automatically and the Green
Power Indicator will light ON/OFF. A “clock” sign
will also be shown at the left of the LCD display indicating whether
the timer is “ON” or “OFF”.
10. Use the Reset Button to reset all the time setting values, including
the current and timer ON/OFF Time.
NOTE:
• The hour setting is a 12-hour format (US version) or 24-hour format
(Europe version), the “AM” or “PM” icon will be displayed at the
Top/Bottom left corner of the LCD for indication.
• Pressing and holding the UP Key will cause digits to advance rapidly.
• Simply press the MODE Key to check ON/OFF time when it is not in
the Timer-Setting Mode.
E
F
E
