
Kool Tek G8 Hot and Cold Water Cooler Manual
5
Dispensing and Cold Water
Place a glass under the dispensing spigot in the center of the water outlet panel. For
cold water, hold faucet until the desired amount of water is dispensed and release. For
room temperature water, press/hold dispensing button (#5) until the desired amount of
water is dispensed and release.
Adjusting the Temperature (Cold water only)
By turning the thermostat at the back of the unit, the temperature can be adjusted by
using a small flat screwdriver. Turn the dial clockwise between the high (cool) and low
(colder) levels until the desired temperature is reached. If the water dispenser is not
dispensing water, there could be a possible ice build up due to the thermostat being set
too cold. If this happens, unplug the dispenser overnight and then reset. Set thermostat
to a warmer setting, slowly increasing based on your use and need for cold water.