The battery features a thermal fuse with a rest fuse that will automatically trip and cut all power to
the vehicle if the motor, electric system or battery is overloaded. The fuse will reset and power will
be restored after the unit is turned OFF for 20 seconds and then turned ON again. If the thermal
fuse trips repeatedly during normal use, the vehicle may need repair.
Contact your distributor
please.
To avoid losing power, follow these guidelines:
●
Do not overload the vehicle.
●
Do not tow anything behind the vehicle.
●
Do not drive up steep slopes.
●
Do not drive into fixed objects, which may cause the wheels to spin, causing the motor to
overheat.
●
Do not drive in very hot weather, components may overheat.
●
Do not allow water or other liquids to come in contact with the battery or other electric
components.
●
Do not tamper with the electric system. Doing so may create a short, causing the fuse to trip.
•
It is parents' responsibility to check main parts of the toy before using, Must regularly examine
for potential hazard, such as the battery, charge, cable or cord, plug, screws are fastening
enclosure of other parts and that in the event of such damage, the toy must not be used until
that damage had been properly removed.
• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Recharge the battery after each use. Only an adult can handle the battery. Recharge the
battery at least once a month when the vehicle raider is not being used.
• Do not wash the vehicle with a hose. Do not wash the vehicle with soap and water. Do not
drive the vehicle in rainy or snowy weather. Water will damage the motor, electric system and
battery.
• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax
furniture polish. Do not use car wax. Do not use abrasive cleaners.
• When not using, all the electrical source should be turn off. Turn off the power switch and
disconnect the battery connection.
Our products are suitable for
ASTM F963; GB6675; EN71 and EN62115 standard.
Fuse
Maintaining │ 2
1
RISK OF FIRE. Do not bypass. Replace only with 25A fuse.
