POWER
Battery: 4xAA batteries
SWITCH OFF OR AUTO OFF
1
，
After finish weighing or if no any operation of the scale, the scale will automatically
switch off after approximate 30 seconds.
LOW BATTERY INDICATOR
When the battery power is low, scale will display "Lo", please replace the battery in time.
ATTENTION
1
，
Place the scale on a hard and flat surface to ensure the greatest accuracy and
reliability.
2
，
Do not use any chemical cleanser to clean the scale. Clean your scale with a damp
cloth, but do not immerge your scale into any liquid, as this can damage the inner
parts.
3
，
To ensure that the scales of life, please do not over-heat scale placed in the
environment.
4
，
Remove the batteries if the scale is not being used for a long time.
5
，
Treat your scale with care. I
t’s a precision instrument, do not drop it or jump on it.
Don’t put the object over 150% of the max capacity on the plate.
6
，
If the scal
e doesn’t work, check whether the battery contact well with the contactor. If
the scale has been used for a long time, check whether the batteries need to be
replaced. If necessary, please contact the distributor or call our company.
7
，
This scale is only used in household for body weight measurement, not for
commercial or other use
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Summary of Contents for S1
Page 3: ......
