BAKL40T12AF
Edition: 20.03.2018
Page: 6/10
3.1.
Operating Conditions
NOTE:
KONVEKTA uses components made of copper and aluminium, which last a whole unit life-
time under normal environmental conditions. Should the units be operated under aggressive envi-
ronmental conditions, i.e. air containing salt-, phosphate- or ammoniac extremely, a corrosion of the
cupper- and aluminium components can not be ruled out. The cupper- and aluminium components
of the KONVEKTA systems are not suitable for such extreme application conditions. We indicate
emphatically, that corrosion is not subject to warranties for defects. KONVEKTA does not take over
any warranties for defect, neither for corrosion nor for consequential damage resulting there from,
nor for damages caused by cleaning the systems with highly compressed or corrosion advancing
substances.
4.
Operation
Attention in case of roof top a/c units: Never switch on the a/c unit during car-wash!
Danger of accidents!
-
Focussing your attention on the road traffic is of top priority
-
Only operate your air conditioning unit when the traffic situation allows it.
-
Make sure you can clearly recognize and read all operation- and display-elements at any time
-
Protect all displays against irritating sun glare
and any other optical disturbances
-
Please note that the control panel keys have not been designed for heavy stressing
-
Excessive or fast pressing of the keys for adjusting the set temperature does not ac-
celerate the cooling down process. It possibly damages the control panel and so af-
fects the general performance of the air conditioning unit
4.1.
Control unit
You operate the air conditioning unit via the original WABCO – control unit
(see original
WABCO- operation instructions „ATC-CAN„)
For operation the driver can use 3 rotary potentiometer and maximal 5 keys. Depending on the seri-
al-model modification of the bus different control desks are used.
In order to release the driver from extensive adjustments for the passengers compartment he is able
to switch off the complete control for this area. All other functions on the control desk serve for the
individual adjustments of the driver’s cabin.
Flap windshield/floor
Frontbox temperature
Blower speed
Reheat
Additional heater
Heater passen-
gers compart-
ment
Driver’s seat climate
Smog
