5
1. General ............................................................................................................................ 5
2. Safety Notes .................................................................................................................... 5
3. Connection to KONTRONIK speed control ................................................................... 5
4. Mounting of this motor .................................................................................................. 6
5. Maintenance.................................................................................................................... 6
6. Warranty .......................................................................................................................... 6
7. Service, Technical Support, Hotline .............................................................................. 6
8. EG conformity declaration ............................................................................................. 6
9. Technische Daten / Technical Data ................................................................................ 7
10. Abmessungen / Dimensions .......................................................................................... 8
1. General
Thank that you have chosen a product of the
PREMIUM LINE. The PYRO motors are brushless
motors, which are specially designed for use in
helicopters and have the following characteristics:
-
Neodymium magnets, heat resistant up to
150°C.
-
Special coil material, heat resistant up to
300°C
-
Fine balancing of the rotor
-
Optimized sheet metal cut
-
Optimized air circulation and radial fan
-
Optimized magnet circle
PYRO motors require an ESC for sensorless
electrical commutation of brushless motors.
2. Safety Notes
PYRO motors are outrunning motors. Because
they have an external turning housing, never touch
them during operation. Please check that the
motor housing can turn freely, before start.
Check the headless screws which fix the shaft in
the PYRO motors regularly. E.g. through vibrations
of an unbalanced propeller it is possible, that the
headless screws can get loose.
Maximum permissible motor RPM is:
Type
maximum RPM
MINIPYRO 400-x
32000
PYRO 600-x
28000
PYRO 700-x
25000
If you use a gearbox, please note:
Motor RPM = rotor RPM x gear ratio
As soon as a speed control and a battery are
connected to the motor, it is possible that the
motor starts (e.g. by operating error or by
electrical defect). From this moment on, use the
drive with highest possible caution
This motor (especially with propeller or rotor)
can cause considerable injuries. Considerable
injuries can also be caused by flying off parts.
Too much heat will destroy the motor. The
winding of the PYRO is heat resistant up to
300°C short time and the Magnets up to 150°C
short time. Please have enough cooling.
Do not open the motor. Sensitive parts inside
the motor may be damaged.
Usage of these motors with speed controls for
brushed motors or by direct connection to a power
supply is not admissible. Such a use can damage
the motor.
3. Connection to KONTRONIK speed control
The JIVE ESCs are fitting perfectly in performance
and power to control a PYRO motor.
Connect the motor cable with the yellow or red /
green / blue cables of the ESC. The motor rotation
will be reversed by changing 2 of the 3 motor
cables and/or by mode 7 of the JIVE ESC.
The motor cables are non solderable
enameled copper wires of the motor itself.
You must not shorten these cables. The
winding will be irreparably damaged. Cutting
motor cables will terminate all warranty
claims.
!
!
