7
5. Quick Start:
The ESC comes with an APM (Auto-Programming-Mode), so it will adapt itself to the throttle
positions of the RC. Proceed as follows:
a) Connect the motor to the POWERJAZZ speed control.
b) Plug the POWERJAZZ ESC in the appropriate receiver socket.
c) Switch on the Tx with the throttle control to off.
d) Connect the battery to the POWERJAZZ speed control.
e) 3 or 6 beep sounds from the motor.
f) Give 1 sec. full throttle or start with full throttle.
g) Ready.
In all other modes the stick ways are only programmed once and have not to be adapted at
each start again.
6. Troubleshooting
Unexpected motor cut off:
•
Strong interference with the Rx.
Install the Rx and the antenna with more
distance from ESC and motor. Use torodial
core KONTRONIK #9700.
•
Over temperature:
Improve the cooling of the speed control.
•
Interruption of the power:
Only use high quality connectors as
KONTRONIK silver connector #9010 or
gold connectors.
7. Technical Data POWERJAZZ 63V
•
18-45 NiCd/NiMH cells.
•
5-15 Li-Ion cells, 13-63V.
•
120A continuous current (2,4 Ah)
•
200A for 15s electronically limited.
•
220g with cable
•
84x51x35mm
8. Recycling
Electric components may
not been thrown out with
household rubbish. They
should
be
disposed
of
properly and environmentally safe after
their service life.
The national and local refuse disposal
regulations must be observed.
