Kontron SBC-815ET-VER, User Manual

Page: 60 / 98

page 60 SBC-815ET-VER User’s Guide
OnChip Primary/Secondary PCI IDE
The chipset contains a PCI IDE interface with support for two IDE channels. Select
Enabled to activate the primary IDE interface. Select Disabled to deactivate this
interface.
Options: Enabled/Disabled.
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for
each of the four IDE devices that the onboard IDE interface supports. Modes 0 through
4 provide successively increased performance. In Auto mode, the system determines
the best mode for each device.
Options: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33/66/100 implementation is possible only if your IDE hard drive supports it
and the operating environment includes a DMA driver (Windows 95 OSR2 or a third-
party IDE bus master driver). If your hard drive and your system software both support
Ultra DMA/33/66/100, select Auto to enable BIOS support.
Options: Auto, Disabled.
USB Controller
This item allows you to enable/disable USB (Universal Serial Bus) function.
Options: Enabled/Disabled
USB Keyboard Support
This item allows you to enable USB keyboard function under POST, BIOS setup menu,
DOS, or Windows-NT with no USB driver loaded.
Options: Enabled/Disabled
Init Display First
This item allows you to select the first display port to be initialized.
Options: PCI Slot (off-board video adaptor), Onboard/AGP