Kontron Revolution plus, User Manual

Page: 36 / 85

28 02/18/05 ReVolution User Manual 1.00
Inserting a Hard Disk Drive (HDD)
• Close top display so only metal is exposed.
• Lay unit on its top.
• Push slide latch to right.
• Remove HDD door.
• Lift handle on HDD module up to 90° angle.
• Align posts on sides of module with receiving
slots in HDD bay.
• Push module down until it reaches bottom of the bay.
• Pull forward until it fully engages HDD connector.
• Press handle back down. The module must be fully
engaged with the connector for the handle to fit down.
2
• Replace HDD module door.
• Move slide latch left until it reaches stop point.