Kontron Revolution plus, User Manual

Page: 24 / 85

16 02/18/05 ReVolution User Manual 1.00
Getting Started
This section describes first-time or typical start-up operations of the ReVolution system:
‰
Connecting to Power
‰
Power On and Power Off
‰
Battery Power
‰
Converting from Laptop to Tablet and Back
‰
Windows End-User Experience
‰
Accessing this ReVolution User Manual
Connecting to Power
The ReVolution is shipped in the “off” condition. Depending on your required range of use, you can connect the
ReVolution to AC (via an AC/DC adapter) or DC power supply.
This section will detail the proper cabling requirements for your ReVolution system.
x
Before using your system, become familiar with the
components and check that everything is connected
properly.
x
Following a proper cabling procedure will prevent a
false “power on” condition, which could result in unit
operational failure.
x
Attach the power cable last!
x
The plug on the AC power cable supplied corresponds
to the requirements of the country in which you
purchased your ReVolution system.
x
To avoid accidentally disconnecting your computer, plug
the AC power cable into a nearby outlet.
x
Allow at least 200 mm (approximately 8”) between the
ReVolution and the AC/DC adapter.
x
The AC/DC adapter must be uncovered and stand freely
with at least 100 mm (approximately 4”) free space
around it and the ReVolution.
x
Do not place the AC/DC adapter on a heat-sensitive
surface.