manualshive.com logo in svg

Kontron PCI-759, User Manual

Share
Download
Kontron PCI-759 User Manual Download Page 51

 

10. AMI BIOS Configuration 

 

PCI-759 – User’s Guide (V1.02) 

 

www.kontron.com 

49 

10.3.6.2.

 

ACPI APIC support 

This option determines whether or not to include the ACPI APIC table pointer to the RSDT pointer list.  
It is possible to choose between: 

Enabled

 

and 

Disabled.

 

Enabled 

This setting will initiate ACPI APIC support. 

Disabled 

This setting disables ACPI APIC support. 

 

10.3.6.3.

 

AMI OEMB table 

This option allows you to include the OEMB table pointer to R(X)SDT pointer list. 

It is possible to choose between

: Enabled

 and 

Disabled

. 

Enabled 

This setting enables adding an OEMB table. 

Disabled 

This setting disables adding an OEMB table. 

 

 

OEMB table is used to pass POST data to the AML code during ACPI O/S operation. It is required for 
proper functionality. 

 

10.3.6.4.

 

Headless mode 

This option is used to update the ACPI FACP table to indicate headless operations. 

It is possible to choose between: 

Enabled

 and 

Disabled

.

 

Enabled 

This option enables updating the ACPI FACP table to indicate headless operation. 

Disabled 

This option disables updating the ACPI FACP table to indicate headless operation. 

 

Summary of Contents for PCI-759















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands