9. Jumpers and Connectors Overview
PCI-759 – User’s Guide (V1.02)
www.kontron.com
13
9.
Jumpers and Connectors Overview
The jumpers and connectors of the PCI-759 board will be described in detail below.
Signals suffixed by a pound (#) are active-low.
All headers will have a pitch of 0.100" (2.54mm), otherwise noted different.
Connectors on the I/O Panel
USB USB6
Connector
LAN
Ethernet1 Connector
VGA VGA
Connector
LAN2
Ethernet2 Connector
PS/2Kb&Ms.
PS2 Keyboard/Mouse (CN3)
On-Board Jumpers
JP1
Jumper for LCD (LVDS) power selection (+3.3V or +5.0V)
JP2
RTC Reset (Clear CMOS)
JP3
(Option) CompactFlash Configuration (Master or Slave)
pins 6 and 8 (FP1) The pins 6 and 8 of the FP1 shorted: internal speaker is enabled (default).
On-Board Connectors
FP1
Reset, HDD LED, internal & external speaker (2x4-pin)
FP2
Power Button, Power LED, KB.-Lock, I2CSMBUS (2x5-pin)
CN1
ATX Power Control Connector (2-pin)
CN2
Dual Channel LVDS Connector [JILI New] (40-pin)
CN5
Audio Connector (10-pin) (Line-in, Line-out, Mic.)
CN6
USB header (USB0+USB1) (9-pin+key)
CN7
USB header (USB2+USB3) (9-pin+key)
CN8
USB header (USB4+USB5) (9-pin+key)
CN9
ITP Connector (28-pin) (located on the bottom side)
IDE
IDE (40-pin)
CF
(IDE Option): CompactFlash Connector (50-pin) (located on the rear side)
SATA1 SATA1
Connector
SATA2 SATA2
Connector
SATA3 SATA3
Connector
SATA4 SATA4
Connector
FDD
Floppy Connector (34-pin)
COM1
Serial Connector COM1(10-pin)
COM2
Serial Connector COM2 (10-pin)
LPT
Parallel Connector LPT (26-pin)
FAN1
CPU-Fan Connector, 12V (4-pin)
FAN2
Fan Connectors, 12V (4-pin)
