Chapter 3
Getting Started
Kontron User's Guide PC/104-520
5
3.
Getting Started
The easiest way to get the PC/104-520 board running is to use a starter kit from Kontron Embedded Modules
GmbH. Take the following steps:
Connect the power supply to the starter kit baseboard (part of the starter kit).
Plug the PC/104-520 to the PC/104 bus connector on the starter kit baseboard.
Make all necessary connections from the PC/104-520 to the starter kit board.
Connect the CRT monitor to the CRT interface or a LCD panel to the LCD-interface by using the
corresponding adapter cable.
Plug a keyboard to the starter kit’s keyboard connector.
Plug a hard-drive data cable to the PC/104-520 hard-disk interface. Attach the hard disk to the
connector at the opposite end of the cable. If necessary, connect the power supply to the hard
disk’s power connector.
Make sure all your connections have been made correctly. Turn on the power.
Enter the BIOS by pressing the CTRL+ALT+S keys during boot-up. Make all changes in the BIOS
setup. See the BIOS chapter of this manual for details.
