manualshive.com logo in svg

Kontron MS1300 Series, Application Note

Share
Download
Kontron MS1300 Series Application Note Download Page 16

MS1300   Getting Started | VLAN-segregated Management and Payload Networks  

 

www.symkloud.com 

 

// 16 

 

4.6.

 

Confirm Proper Networking Configuration (Management Network) 

Confirm the validity of the networking configuration by testing network connectivity to the external network via the 
management IP of the ToR switch.  

Command 

Purpose 

 
# 

ping ip 

192.168.101.254

 

PING server 192.168.101.254, 56 bytes of data. 
64 bytes from 192.168.101.254: icmp_seq=0, time=0ms 
64 bytes from 192.168.101.254: icmp_seq=1, time=0ms 
64 bytes from 192.168.101.254: icmp_seq=2, time=0ms 
64 bytes from 192.168.101.254: icmp_seq=3, time=0ms 
64 bytes from 192.168.101.254: icmp_seq=4, time=0ms 
Sent 5 packets, received 5 OK, 0 bad 

 
Ping external management network 
using the management IP of the ToR 
switch. 
 

4.7.

 

Connect the MS1300 Platform to the Network (Payload/Data Network) 

Connect your payload/data network to uplink 3 
(see label 5 on Figure 4). 

 

 

4.8.

 

Confirm Proper Networking Configuration (Spanning-Tree) 

Confirm that the spanning-tree configuration works properly by looking at the forwarding states of the uplinks connected 
to your networks: Ethernet 1/3 (payload/data network) and Ethernet 1/25 (management network). Both interfaces should 
be in forwarding state on MST instance 0. You should also look at the forwarding states of the interfaces on the ToR 

-

 

Command 

Purpose 

 
# 

sh spanning-tree mst 0 

CIST Bridge STP Status 
Bridge ID    : 32768.00-A0-A5-80-52-9C 
Root ID      : 32768.00-A0-A5-80-52-9C 
Root Port    : - 
Root PathCost: 0 
Regional Root: 32768.00-A0-A5-80-52-9C 
Int. PathCost: 0 
Max Hops     : 20 
TC Flag      : Steady 
TC Count     : 148 
TC Last      :   0d 00:02:59 
Mst    Port       Port Role       State       Pri  PathCost  Edge  P2P  Uptime 
-----  ---------  --------------  ----------  ---  --------  ----  ---  ------------- 
CIST   Eth 1/3    DesignatedPort  Forwarding  128     20000  No    Yes    0d 00:26:02 
CIST   Eth 1/7    DesignatedPort  Forwarding  128     20000  Yes   Yes    0d 00:26:20 
CIST   Eth 1/8    DesignatedPort  Forwarding  128     20000  Yes   Yes    0d 00:26:20 
 
====== [truncated] ===== 
 
CIST   Eth 1/25   DesignatedPort  Forwarding  128     20000  No    Yes    0d 00:26:27 
 
====== [truncated] ===== 
 

 
Display 
spanning-
tree mst 
0 status. 
 

 

Summary of Contents for MS1300 Series






















Reviews:

No comments

Brands by name

Popular brands

Load more brands