KTD-S0005-0
Page 10
Getting Started
MOPSlcdLX
User's Guide
4
Getting Started
Getting started with the MOPSlcdLX is very easy. Take the following steps:
Plug a suitable DDR-SDRAM memory module into the RAM socket.
Plug the MOPSlcdLX to the PC/104 bus connector on the starter kit baseboard.
Make all necessary connections from the MOPSlcdLX to the starter kit board (cables come with
the starter kit). The starter kit board offers various interfaces on standard connectors.
Connect the CRT monitor to the CRT interface or a LCD panel to the JILI interface by using the
corresponding adapter cable.
Plug a keyboard and/or mouse to the PS/2 connectors.
Plug a data cable to the hard disk interface. Attach the hard disk to the connector at the oppo-
site end of the cable. If necessary connect the power supply to the hard disk’s power connec-
tor.
Make sure all your connections have been made correctly. Turn on the power.
Enter the BIOS by pressing the Del key during boot-up. Make all changes in the BIOS Setup.
See the BIOS Setup chapter of this manual for details.
Summary of Contents for MOPSlcdLX
Page 1: ...MOPSlcdLX KTD S0005 0...
