mITX-SSH-S - User Guide, Rev. 1.0
// 63
Table 48: Pin Assignment JP2
Jumper 1 Position
Description
Pin 1-2
Pin 2-3
X
-
Normal (default position)
-
X
Clear RTC CMOS (board does not boot with the jumper in this position)
“X” = Jumper set (short) and “-” = jumper not set (open)
Do not leave the jumper in position 2-3, otherwise if the power is disconnected, the
battery will fully deplete within a few weeks.
7.20.3.
mPCIE / mSATA Selection for MPCIE1 (JP3)
Figure 36: mPCIE / mSATA Selection JP3
Table 49: Pin Assignment JP3
Jumper 1 Position
Description
Pin 1-2
Pin 2-3
X
-
mSATA
-
X
mPCIE
“X” = Jumper set (short) and “-” = jumper not set (open)
7.20.4.
mPCIE / mSATA Selection for MPCIE2 (JP4)
Figure 37: mPCIE / mSATA Selection JP4
Table 50: Pin Assignment JP4
Jumper 1 Position
Description
Pin 1-2
Pin 2-3
2
3
1
2
3
1
2
3
1
