mITX-APL
Doc. Rev. 1.2
www.kontron.com
// 62
2.
Change to the drive representing the USB stick.
fsx: (x = 0,1,2,etc. represents the USB stick)
Change to the directory where you copied the flash tool.
cd <your_directory>
3.
Start flash.nsh or flash_with_fpt.nsh (if available)
OR type
fpt –y –f pITX_APL_BIOS_Ver_<xxx>……bin
4.
Wait until flashing is successful and then power cycle the board.
Do not switch off the power during the flash process!
