Kontron MicroTCA OM6040D, User Manual

Page: 21 / 42

OM6040D Introduction
ID: 1038-6516, Rev. 1.0 Page 1 - 7
1.4 Standards
This Kontron MicroTCA™ shelf complies with the requirements of the following standards.
Table 1-2: Standards
COMPLIANCE TYPE STANDARD TEST LEVEL / COMMENTS
CE Emission EN55022
EN61000-6-3 --
Immission EN55024
EN61000-6-2 --
Electrical Safety EN60950-1 Conditions of acceptability:
• The equipment has only been evaluated for
use in office environment (pollution degree 2).
• The equipment is intended for connection to
TN power system and IT power system for
Norway only (phase to phase 230V).
• The equipment is a class 1 equipment and
must be connected to an earthed outlet. the
socket outlet shall be installed near the equip-
ment and shall be easily accessible.
• For safe operation, the equipment must be
protected by a max. 20A fuse (e.g. in the pow-
er installation system or in power supply plug
like in UK).
• Fire enclosure must be considered in the end
application.
• Slotboards that can be inserted must comply
to EN60950-1.
• Slots not used must be covered.
Mechanical Mechanical Dimen-
sions IEEE 1101.10 --
Environmental and
Health Aspects Climatic Humidity IEC60068-2-78 93% RH at 40°C, non-condensing
WEEE Directive 2002/96/
EC Waste electrical and electronic equipment
RoHS Directive 2002/95/
EC Restriction of the use of certain hazardous
substances in electrical and electronic
equipment