KTD-00774-D
KTUS15/mITX
Page 73 of 82
www.kontron.com
7.5.1 Boot – Boot Settings Configuration
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Quick Boot [Enabled]
Quiet Boot [Disabled]
AddOn ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait for ‘F1’ If Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
PC Speaker/Beep [Enabled]
Force boot Device [Disabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time needed
to boot the system.
<-> Select Screen
|| Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.63+ (C)Copyright 1985-2008, American Megatrends, Inc.
Feature
Options
Description
Quick Boot
Enabled
Disabled
Allows BIOS to skip certain tests while booting in
order to decrease boot time.
Quiet Boot
Disabled
Enabled
Black Screen
White Screen
Disabled: Displays normal POST messages.
Enabled: Displays OEM Logo (no POST messages).
Black Screen: No picture.
White Screen: White picture.
AddOn ROM Display Mode
Force BIOS
Keep current
Set display mode for Option ROM.
Bootup Num-Lock
Off
On
Select Power-on state for numlock
PS/2 Mouse Support
Disabled
Enabled
Auto
Select support for PS/2 Mouse.
Wait for ‘F1’ If Error
(see note)
Disabled
Enabled
Wait for F1 key to be pressed if error occurs.
Hit ‘DEL’ Message Display
Disabled
Enabled
Displays “Press DEL to run Setup” in POST.
Interrupt 19 Capture
Disabled
Enabled
Enabled: Allows option ROMs to trap interrupt 19
PC Speaker/Beep Disabled
Enabled
Control the default beeps during boot of the system.
This setting will also control the beep during
enumeration and (un)plug of USB.
Force boot Device
Disabled
Primary IDE Master
Primary IDE Slave
Third IDE Master
Third IDE Slave
Network
Overrides current boot setting. Device must be in the
boot priority menu, though. If the device fails to boot,
the system will NOT try other devices.
Note
: List of errors:
<INS> Pressed
Primary Master Hard Disk Error
PCI I/O conflict
Timer Error
S.M.A.R.T HDD Error
PCI ROM conflict
Interrupt Controller-1 error
Cache Memory Error
PCI IRQ conflict
Keyboard/Interface Error
DMA Controller Error
PCI IRQ routing table error
Halt on Invalid Time/Date
Resource Conflict
NVRAM Bad
Static Resource Conflict
