Kontron KTUS15/mITX 1.6GHz Std User Manual Download Page 2

KTD-00774-D 

KTUS15/mITX 

Page 2 of 82 

 

 

www.kontron.com

Document revision history. 

Revision 

Date 

By 

Comment 

 

 

 

 

Jan. 12

th

 2010  MLA 

RAID info corrected. Info on max video memory added. Wake on USB 
support corrected. PWR_OK on Feature connector corrected to 
POWER_UP and related info corrected. Added OS support. Feature 
connector pin 4 corrected to PSUP_OFF signal. 

Oct. 13

th

 2009  MLA  Added “mounting the board to chassis”. Minor changes. 

Sep. 22

nd

 2009  MLA  Added SDRAM PN available. Minor changes. Improved drawings.  

Jun. 19

th

 2009  MLA  First complete version 

May 27

th

 2009  MLA  Initial release 

 

 

Copyright Notice: 

Copyright 

©

 2007, KONTRON Technology A/S, ALL RIGHTS RESERVED. 

 
No part of this document may be reproduced or transmitted in any form or by any means, electronically or 
mechanically, for any purpose, without the express written permission of KONTRON Technology A/S. 
 
 

Trademark Acknowledgement: 

Brand and product names are trademarks or registered trademarks of their respective owners. 
 
 

Disclaimer: 

KONTRON Technology A/S reserves the right to make changes, without notice, to any product, including 
circuits and/or software described or contained in this manual in order to improve design and/or 
performance. 
Specifications listed in this manual are subject to change without notice. KONTRON Technology assumes no 
responsibility or liability for the use of the described product(s), conveys no license or title under any patent, 
copyright, or mask work rights to these products, and makes no representations or warranties that these 
products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 
Applications that are described in this manual are for illustration purposes only. KONTRON Technology A/S 
makes no representation or warranty that such application will be suitable for the specified use without 
further testing or modification. 
 

Summary of Contents for KTUS15/mITX 1.6GHz Std



















































































Reviews: