KTQM67 Users Guide
KTD-N0819-E Page 7
Introduction
This manual describes the KTQM67/mITX, KTQM67/Flex and KTQM67/ATXP boards made by
KONTRON Technology A/S. The boards will also be denoted KTQM67 family if no differentiation is
required.
The KTQM67 boards, all based on the QM67 chipset, support 2
nd
generation Intel® i7 -, i5 -, i3 2Core
and 4Core processor and the Celeron B810 2Core, see “Processor Support Table for more specific
details.
The KTQM67 family consist on members having different form factors, and the same functionality
except for the functions listed in the table below.
KTQM67 variants Format PCI LPT SODIMM Sockets 12V Power Supply
KTQM67/mITX
mITX
-
-
2
Yes
KTQM67/Flex
Flex
3
1
4
No
KTQM67/ATXP
ATX
6
1
4
No
Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is
focused on describing the KTQM67 board’s special features and is not intended to be a standard PC-AT
textbook.
New users are recommended to study the short installation procedure stated in the following chapter
before switching-on the power.
All configuration and setup of the CPU board is either done automatically or manually by the user via
the CMOS setup menus. Only exception is the Clear CMOS jumper.
Introduction
