KTQM67 Users Guide
KTD-N0819-E Page 57
Warning
: Don’t leave the jumper in position 1-2, otherwise the battery will fully depleted within a
few weeks if power is disconnected.
6.13
Clear CMOS Jumper (J37)
The Clear-CMOS Jumper (J37) is used to clear the CMOS content.
J37
Description
pin1-2 pin2-3
X
-
Clear CMOS data
-
X
Default positions
-
-
Secure CMOS function is disabled and Default values are used
To clear CMOS settings, including Password protection, move the Clear CMOS jumper to pin 1-2 for a few
seconds (~10 sec) (works with or without power connected to the system).
To disable the Secure CMOS function (selected in BIOS), remove the jumper completely from J37.
Leave the Jumper in position 2-3 (default position).
Jumper (in default position)
J37 pin 1
Internal Connectors
!
