KTQ87/mITX Users Guide
KTD-N0882-D Page 11
Hardware
Monitor
Subsystem
•
Smart Fan control system, support Thermal® and Speed® cruise for two on-board
Fan connectors: CPU Fan (on-board) and System Fan (on-board)
•
Thermal inputs: CPU Die temperature (pre/- 3ºC), System temperature
(pre/- 3ºC)
•
Intrusion (Case Open) detect input, (via Feature connector)
•
Sleep S5# Indication, (via Feature connector)
•
System Powergood Signal, (via Feature connector)
Power
Supply Unit
ATX/BTX (w. ATX+12V) PSU, 24-pin and 4-pin
Battery
Exchangeable 3.0V Lithium battery for on-board Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR-2032L/BN, CR2032N/BN or CR-2032L/BE.
Approximate 6.2 years retention.
Current draw is less than 4.2µA when PSU is disconnected and 0 µA in S0 – S5.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
BIOS
•
Kontron Technology / Phoenix BIOS (EFI core version)
•
Support for ACPI 3.0 ( Advanced Configuration and Power Interface), Plug & Play
o
Suspend (S1 mode)
o
Suspend To Ram (S3 mode)
o
Suspend To Disk (S4 mode)
•
“Always On” BIOS power setting
•
RAID Support (RAID modes 0,1, 5 and 10)
Operating
Systems
Support
•
Windows XP (32b*, limited support may apply)
•
Windows 7 (32b + 64b *)
•
Windows 8 (32b + 64b *)
•
Linux
•
VxWorks
•
WES7 (32b + 64b)
*= Out Of The Box installation test only.
System Specification