KTQ87/mITX Users Guide
KTD-N0882-D Page 10
Video
Intel ® i5 & i7 4
rd
Generation Desktop processors support Intel ® HD Graphics 4600.
3x digital display ports via the Intel® Haswell CPU.
•
3x DP (DisplayPorts), comply with DisplayPort 1.2 specification.
•
HDMI panel support via DP to HDMI Adapter Converter.
•
DVI panel support via DP to DVI Adapter Converter.
•
VGA panel support via DP to VGA Adapter Converter.
•
Triple independent pipes for Mirror or Triple independent display support
•
Triple independent pipes for triple independent or cloned displays are supported
from OS. Any 3 displays via DP0, DP1, DP2 can be used.
I/O Control
Via ITE IT8516E Embedded Controller via LPC Bus interface
Peripheral
interfaces
•
Four USB 3.0 / USB 2.0 on I/O area
•
Four USB 2.0 ports on internal pinrows
•
One USB 2.0 ports on internal mPCIe connector
•
One USB 2.0 ports on internal mSATA connector
•
Two Serial ports (RS232) on internal pinrows
•
Five Serial ATA-600 IDE interfaces
•
RAID 0/1/5/10 support
LAN
Support
•
1x 10/100/1000Mbits/s LAN (ETHER1) using Intel® Clarksville WGI218LM Gigabit
PHY connected to Q87 supporting AMT 9.0
•
1x 10/100/1000Mbits/s LAN (ETHER2) using Intel® Pearsonville I211AT PCI
Express controller
•
PXE Netboot supported.
•
Wake On LAN (WOL) supported
Expansion
Capabilities
•
PCI-Express slots:
o
1 slot PCIe x16 (Gen 2.0 & 3.0)
o
1 slot miniPCI-Express (Support only mSATA signals and USB 2.0 signals
without WAKE support)
o
1 slot miniPCI-Express (PCI Express signals and USB 2.0 signals)
•
SMBus, compatible with ACCES BUS and I2C BUS, (via Feature connector)
•
SPI bus routed to SPI connector (BIOS Recovery module interface)
•
DDC/AUX Bus routed to DP connector (Auto detect to DDC when using passive
DP to HDMI or DVI adapters)
•
18 x GPIOs (General Purpose I/Os), (via Feature connector)
•
DAC, ADC, PWM and TIMER (Multiplexed), (via Feature connector)
•
WAKE UP / Interrupt Inputs (Multiplexed), (via Feature connector)
•
3 Wire Bus for GPIO Expansion (up to 152 GPIOs), (via Feature connector)
•
8 bit Timer output, (via Feature connector)
System Specification