KTD-00781-A
KTG41 family
Page 11 of 78
www.kontron.com
2 System
specification
2.1
Component main data
The table below summarizes the features of the KTG41/ATXu embedded motherboard.
Form factor
KTG41/ATXu: Micro-ATX (243,84millimeters by 243,84millimeters)
Processor
•
Support for Supports Intel® Core™2 Quad processor Q9000 series, Supports Intel®
Core™2 Duo processor E7000 and E8000 in LGA775 package with up to 1333MHz
system bus and 3/6/12MB internal cache.
•
Support
for
Yorkfield
(45 nanometre) and
Wolfdale
(45 nanometre) family processors.
Memory
•
2 pcs. DDR3 DIMM 240pin DRAM sockets.
•
Support for DDR 800/1066MHz (PC3-6400/PC3-8500)
•
Support system memory from 512MB and up to 4GB (*).
(*) Less than 4GB displayed in System Properties using 32bit OS.
(Shared Video Memory/PCI resources are withdrawn).
•
ECC not supported
Chipset
Intel G41 Chipset consisting of:
•
Intel® AC82G41 Graphics Memory Controller Hub (GMCH)
•
Intel® ICH7R I/O Controller Hub (ICH7R)
Video
•
Intel® GMA X4500 graphics engine
•
Dynamic Video Memory Technology (DVMT 5.0), allowing up to 384MB dynamically
allocated Video Memory (System memory is allocated when it is needed).
•
Analogue Display Support CRT, 350-MHz, 24 bit integrated RAMDAC with support for
analogue monitors up to 2048 x 1536 @ 75 Hz
•
Native Display port and DVI support. The digital ports are multiplexed on to the PEG
interface using passive PEG card (Accessory).
•
Serial Digital Video Out (SDVO) ports (2 channels) for additional CRT, LVDS panel,
DVI, TV-Out and/or HDMI support via Advanced Digital Display 2 (ADD2) cards or
Media Expansion Cards.
•
Dual independent pipe support, Mirror and Dual independent display support
•
Dual Monitor support with combinations of SDVO port devices and onboard CRT
Audio
Audio, 7.1 and 7.2 Channel High Definition Audio Codec using the VIA 1708B codec
•
Line-out
•
Line-in
•
Surround output: SIDE, LFE, CEN, BACK and FRONT
•
Microphone:
MIC1
•
CDROM
in
•
SPDIF
Interface
•
Onboard
speaker
I/O Control
Winbond W83627DHG LPC Bus I/O Controller
Peripheral
interfaces
•
Four USB 2.0 ports on I/O area
•
Four USB 2.0 ports on internal pinrows
•
Two Serial ports (RS232)
•
One Parallel port, SPP/EPP/ECP
•
Four Serial ATA-300 IDE interfaces with RAID 0/1/5/10 support
•
One Ultra PATA 100/66/33 IDE interface supporting two drives
•
PS/2 keyboard and mouse ports
LAN
Support
•
2x 10/100/1000Mbits/s LAN using Marvell 88E8071 controllers
•
RPL/PXE netboot supported. Wake On LAN (WOL) supported.
BIOS
•
Kontron Technology / AMI BIOS (core version)
•
Support for Advanced Configuration and Power Interface (ACPI 3.0), Plug and Play
o
Suspend
To
Ram
o
Suspend
To
Disk
o
Intel Speed Step
•
Secure CMOS/ OEM Setup Defaults
•
“Always On” BIOS power setting
•
RAID Support (RAID modes 0, 1, 5 and 10) (for Linux O/S only RAID 0 and 1)
(Continues)
