Slide Rails (Option)
50
KISS 2U - User’s Manual (Version 1.01)
Installing the Device in an Industrial Cabinet (using Slide Rails)
rial cabinet.
and brackets to attach the brackets to the telescopic
r section of the telescopic rails (Fig. 25a, pos. 3) to the
5.
Check that the equipment moves evenly and smoothly.
7.
Should it snag or should the rail movement be unsatisfactory:
•
Loosen the screws on the rear installation brackets and adjust
the brackets.
•
Loosen the screws on the KISS 2U chassis.
•
Move the unit back and forward several times.
•
When the movement has improved, tighten the screws and
move the unit the unit back and forward again.
1.
Ensure that the sides of the KISS 2U chassis are parallel and square to the
indust
2.
Use the installation kits
rails (Fig. 25a, pos. 4). Loosely tighten the rear bracket.
3.
Install the telescopic rails in the industrial cabinets.
4.
Attach the inne
KISS 2U chassis.
Place the KISS 2U in the industrial cabinet.
6.
