Maintenance and Prevention
Replacing System Fans
The operation of the KISS 2U platform is permitted only with a
functional fan slide-in mo
dule.
only by Kontron original
part number of the fan slide-in module: 1009-1642
!
changeable while the system is
powered-up. This maintenance may only be carried out by
qualified personnel familiar with the associated dangers.
To replace the fan slide-in module, proceed as follows:
1.
Open the device, as described in the “Installing Expansion Cards” chapter
(Steps 2-3). Pull the cover back as far as necessary to gain access to the fan
slide-in module.
2.
Loosen the knurled screws (Fig. 22, pos. 2) and pull the handle on the fan
slide-in module (Fig. 22, 22b, pos. 5) upwards out of the fan compartment
(Fig. 22a, pos. 7).
Fig. 22: KISS 2U – Details of the fan slide-in module in the system chassis
Defective components may be replaced
spare parts.
❏
Important instructions
The fan slide-in module is
42
KISS 2U - User’s Manual (Version 1.01)
5
3
2
4
2
1
