KBox C-102 - User Guide, Rev. 1.0
// 49
6.3.3.
Expansion Socket for PCIe Mini Cards
Depending on the system configuration ordered, your KBox C-102 can be extended with up to two PCIe Mini cards.
The KBox C-102 provides two internal Mini PCIe sockets for PCIe Mini cards. One of them is
internally accessible (Figure 38, pos. 4). The second Mini PCIe socket is on the bottom side of
the baseboard and can be only at factory equipped with an expansion card.
For installation/removing of the PCIe Mini card (Figure 38, pos. 4), please refer to the subsection
6.3.6 “Installing/Removing the PCIe Mini Card”.
6.3.4.
Riser Cards Expansion Sockets for PCI/PCIe Cards
Depending on the system configuration ordered, your KBox C-102 can be extended with 1x PCI (32 bit) card and up to
four PCIe x4/PCIe x1 cards (full-height, half-length form factor) via corresponding riser cards.
For installation/removing of PCI/PCIe cards into/from the corresponding socket
(Figure 40, pos. 5 and pos. 6, Figure 41, pos. 5 and pos. 8 and Figure 63, pos. 12),
please refer to the subsection 6.3.5 “Installing/Removing PCI/PCIe Expansion Cards“.
To expand your system with expansion cards, please observe the power consumption
specified in
chapter 16/ “Technical Specifications”.
The power consumption of each expansion card does not exceed 15 W.
Please observe that:
KBox C-102-4: supports up to:
4x PCIe x4/PCIe x1 expansion cards
KBox C-102-2: supports up to:
2x PCIe x4/PCIe x1 expansion cards or
1x PCIe x4/PCIe x1 and 1x PCI (32 bit) expansion cards.
For system configuration refer to Figure 59, Figure 60 and for expansion cards
installation
refer to the subsection 6.3.5 “Installing/Removing PCI/PCIe Expansion Cards”.
KBox C-102-1: supports 1x PCIe x4/PCIe x1 expansion card.
For system configuration refer to Figure 61, Figure 62 and for expansion card
installation
refer to the subsection 13.1.1 “PCIe Expansion Slot 1”.
KBox C-102-0: can’t be equipped with PCI/PCIe expansion cards.
Refer also to the area marked “C” in the section 4.4.
