KBox C-102 - User Guide, Rev. 1.0
// 130
17.2.4.
Board interrupt configuration BICFG
This control register is used to route the three individual interrupt sources to a predefined set of interrupt lines.
Table 29: Board interrupt configuration BICFG
0x106
Board interrupt configuration BICFG
Bit
7
6
5
4
3
2
1
0
Name
-
-
PMICF [1:0]
CICF [1:0]
WICF [1:0]
Access
-
-
R/W
R/W
R/W
Reset PS
0
0
%00
%00
%00
PMICF[1:0]: Power Management Interrupt Configuration - The PMICF bit field is used to select an interrupt line
association for the power management interrupt requests as decoded as follows:
Table 30: Power Management Interrupt Configuration
PMICF[1]
PMICF[0]
Interrupt request line
0
0
Disabled (Default)
0
1
LPT_ACK# of Super-I/O
1
0
IRQ10
1
1
IRQ11 (Recommended)
CICF[1:0]: CAN Interrupt Configuration - The CICF bit field is used to select an interrupt line association for the CAN
controller module as decoded as follows:
Table 31: CAN Interrupt Configuration
CICF[1]
CICF[0]
Interrupt request line
0
0
Disabled (Default)
0
1
IRQ5
1
0
IRQ10 (Recommended)
1
1
IRQ11
WICF[1:0]: - The WICF bit field is used to select an interrupt line association for the board watchdog as decoded as
follows:
Table 32: Watchdog Interrupt Configuration
WICF[1]
WICF[0]
Interrupt request line
0
0
Disabled (Default)
0
1
IRQ5 (Recommended)
1
0
IRQ10
1
1
IRQ11
