KBox B-201-CFL - User Guide, Rev. 1.0
// 62
12/
BIOS
The KBox B-201-CFL uses the AMI Aptio 5.x (UEFI) BIOS supported by the D3633-S and D3436-S mainboards. The uEFI
BIOS features a variety of enhanced functions specifically tailored to the KBox B-201-CFL’s hardware features:
Recovery BIOS
BIOS and CPU Microcode Update
Plug & Play
Silent fan
Multi Boot
Always on
Never off
HDD password
TPM V2.0
UEFI only! No legacy support and no Master Boot Repair (MBR) installation.
The BIOS features listed in this user guide are open to change and may not be available in
the latest version of the mainboard’s BIOS.
12.1.
Starting the uEFI BIOS
The uEFI BIOS comes with a Setup program that provides quick and easy access to the individual function settings for
control or modification of the uEFI BIOS configuration. The Setup program allows for access to various menus that
provide functions or access to sub-menus with further specific functions of their own.
To start the uEFI BIOS Setup program, perform the following:
1.
Power-up the board.
2.
Wait until the first characters appear on the screen (POST messages or splash screen).
3.
Press the <DEL> key.
4.
If the uEFI BIOS is password-protected, a request for password will appear. Enter either the User Password
or the Supervisor Password, press <RETURN>, and proceed with step 5.
5.
The Setup menu appears.
If the <DEL> key is not press the POST continues with the test routines
The KBox B-201-CFL uEFI BIOS Setup program uses a hot key navigation system. The hot key legend bar is located at
the bottom of the Setup screens. For a list of the navigation hot keys available in the legend bar with a description,
see Table 26: Navigation Hot Keys Available in the Legend Bar.
