KBox A-103 – User Guide, Rev. 3.0
// 29
This port has no internal termination. If necessary, it has to be terminated externally.
4.4.10.
X205 - FIELDBUS Interface (Option)
Figure 13: X205 - Optional FIELDBUS interface
4.4.11.
X207 - VGA Interface Connector
An external (analog) monitor can be plugged into this interface (X207, Figure 10). The VGA port is provided as a
15-pin D-SUB socket.
For pin assignment of the VGA interface refer to the chapter 11.1.14.
VGA Hot Plug works on Windows and Linux installation which have an appropriate
driver installed. However, VGA Hot Plug does not work on the EFI shell, DOS or BIOS Setup.
Hot Removal and Re-Connect of a VGA display always works on BIOS Setup, EFI shell, DOS
regardless
of the OS Version, provided the VGA display is connected during power up of the KBox.
The optional interface (FIELDBUS) on the front side of the KBox A-103
(X205, Figure 10) must be ordered separately.
To expand KBox A-103 with an interface for FIELDBUS
communication, the FIELDBUS additional card will be installed
always into the second mPCIe slot on the bottom of the baseboard.
This connection can be implemented at factory only.
