Product Manual
JFLEX-Multimedia
Kontron Embedded Modules GmbH
15
Revision 1.2
4.5 IrDA-Connector X15
IRDA (named after the standardizing group ” InfraRed Data Association”) defines a standard for
high speed infrared data transfer (over distances of about 1 meter).
For the infrared feature to be available, you must connect an infrared module to
the IrDA connector and configure the infrared settings in BIOS setup. The IrDA
connector supports the optional wireless transmitting and receiving infrared
module.
The connector with eight positions used on JFLEX-Multimedia for connecting an
infrared module is from manufacturer BERG and the corresponding counterpart
is specified as following:
Manufacturer:
BERG Electronics
Type:
DUBOX system, Housing, single row, 2,54mm
Order number:
65240-008
Fitting crimp contacts:
Manufacturer:
BERG Electronics
Type:
DUBOX system, Contact crimp to wire, 2,54mm
Order number:
76357-301 (Wire size 22-30, Insulation O.D. 0,9-1,5, Loose piece contacts)
Pin
Signalname
Function
1
NC
2
NC
3
IRTX
Infrared transmit
4
GND
Ground
5
IRRX
Infrared receive
6
VCC
+5V
7
NC
8
NC