4-11
If the system is to be used as a benchtop unit, follow these steps to install the rubber feet:
1. Make sure that all boards are secured in the unit and that the cover of the system is installed
and secured.
2. Turn the system upside down.
3. Make sure the surface is free from dust by cleaning each area where the rubber feet will be
secured.
4. Position the four rubber feet onto the system.
5.
Insert one screw (M3x6) inside each rubber foot and secure them to the system.
4.8 Power Cord Connection
To
connect the power cord:
1. Connect the AC power cord into the system inlet.
2.
Connect the AC power cord into a wall outlet.
WARNING
Do not
remove or alter the grounding prong on the power cord. In situations
where a two-slot receptacle is present at the wall power outlet, have it replaced
with a properly grounded three-prong grounding type receptacle to ensure
proper grounding continuity to the chassis inlet.
AC power
inlet