Kontron DREAMS PEED1210 User Manual Download Page 20

 

1-1  

1.1 Introduction 

The DreamSpeed, a 1U open platform, is targeting the next-generation System Integrators and 
independent hardware/software vendors who supply dedicated Internet infrastructure solutions 

deployed in B2B e-commerce sites, portals, server farms, and ISP/ASP data centers. Providing a 
significantly faster time to market, the DreamSpeed can be configured into a customized turnkey 
solution that is dedicated to several Internet network applications including, among others, SSL 
acceleration, load balancing, Virtual Private Networks (VPNs), firewalls, caching, and Web and 
Application servers. 
 

DreamSpeed features many innovations and design advantages that are simply more practical for 
network deployment. Size is the first consideration, as DreamSpeed is only 18” deep, which makes 
it an extremely easy fit in any 600 mm deep rack and, as for height, this 1U small form factor 
allows for up to 42 units to be stacked in one cabinet. The outcome is more power in a smaller 
work environment, which appropriately saves both valuable floor and rack space. Inside each unit 
are two convenient PCI expansion slots that offer the highest scalability in today’s market. Each 

slot can be employed by any standard PCI hardware dedicated to nearly any imaginable Internet 
infrastructure application from firewalls and VPNs to load balancing and Web and Application 
servers. 
 
At the heart of the DreamSpeed is a high-performance SBC, the PCI-951. It is designed to 
accommodate the endless demands for a high performance engine in platforms used in the 

embedded datacom/telecom market. An ideal SBC for high performance Internet security and 
data center solutions, as well as mission-critical CTI and demanding embedded computing 
applications. Key Features for the PCI-951: 
 

• 

Single Pentium® 4 processors up to 2.4GHz 

• 

533 MHz front-side bus 

• 

512K of L2 Cache 

• 

Up to 2 GB of DDR DRAM 

• 

32 bits backplane PCI bus 

• 

Dual Ethernet ports 10/100Base-TX

 

 

• 

EIDE hard disk interface 

• 

USB port 

• 

Watchdog Timer

 

• 

Board and CPU temperature monitoring 

 

 

Six fans cool the system:  
 

- 2 front fans provide positive pressure cooling, equipped with a removable and washable 
foam filter to protect the unit from dust and dirt particles. 
 
- 2 are attached to an airflow channel to provide an efficient cooling system dedicated to the 

SBC. 
 
- 2 fans are located at the rear of the unit for exhaust. 

Summary of Contents for DREAMS PEED1210


















































Reviews: