Kontron cPCI-DMXS64GX, Technical Reference Manual

Page: 54 / 139

Installing the Board
3.11
3.2.6. Onboard Connectors and Headers
Description Connector Comments
CompactPCI Bus J1/J2
J1- CPCI bus signals and power.
J2 – Additional system slot signals.
CompactPCI I/O J3 Serial Ports 2/3, Ethernet 1, power.
CompactPCI I/O J4/J5
Supports PS/2 mouse, serial ports 1 and 2, first
IDE channel, parallel port, keyboard, speaker,
floppy disk, reset, USB, SMBus, and power
signals.
DIMM Sockets J14, J15, J16
Supports 168-pin 64/72-bit DIMMs, up to
1.5G
B of
RAM.
Processor Socket J7, J8 DMXS64GX : Mobile Pentium II / III connector
VGA J6
Supports standard 15-pin DSUB female
connector.
Serial Port 1 J9 Supports standard 9-pin DSUB male connector.
Kontron’s
Mezzanine
J11, J18
This connector handles PCI bus signals to the
mezzanine.
Ethernet 1, 2 J12, J10
RJ-45 connectors with built-in activity and link
indicators.
CompactFlash J13
This connector is dedicated to the Kontron’s
CompactFlash module to support CompactFlash disk.
Keyboard/Mouse J17
Mouse and keyboard signals are combined on a
standard 6-pin DSUB female connector.
Storage Mezzanine J18
This connector is implemented to support floppy drive
and hard disk signals.
PMC J20, J21
The PCI Mezzanine Card (PMC) connectors support
one standard PMC device.
Battery B1 CMOS backup battery connector.
RESET S1 CMOS Battery connector