CP6012
Introduction
ID 33274, Rev. 5.0
Page 1 - 15
P R E L I M I N A R Y
Sockets
Front Panel Connectors
•
VGA: 15-pin, D-Sub connector
•
USB: two 4-pin connectors
•
Ethernet: two RJ-45 connectors
•
COM: 9-pin, D-Sub connector
•
PMC/XMC front panel
Onboard Connectors
•
CompactFlash socket for type I, II and Microdrive™ devices
(primary EIDE interface)
•
I/O extension connector
•
PMC connectors J25 - J28 (Jn1 - Jn4)
•
XMC connector, J15
•
Two SATA connectors
•
one 7-pin, standard SATA connector
•
one 12-pin, SATA extension connector
•
CompactPCI Connector J1 and J2 (J3 - J5 optional)
•
Two 200-pin SODIMM sockets
HW Monitoring
LEDs
System status:
•
TH (green): Overtemperature Status
•
WD (green): Watchdog Status
•
IPMI: Control
information
Gigabit Ethernet status:
•
ACT (green):
network activity
•
SPEED (green / orange): network speed
General Purpose LEDs:
•
I (green):
General Purpose/POST code or board-specific
•
II (green):
General Purpose/POST code or board-specific
Watchdog
Software configurable Watchdog generates IRQ, NMI, or hardware reset.
Thermal Management
CPU overtemperature protection is provided by:
•
Internal processor temperature control unit
•
CPU shut down via hardware monitor
System Monitor
In SCH3112 integrated hardware monitor for supervision of:
•
Several system power voltages
•
Two fan speed inputs
•
Board temperature
IPMI
Baseboard Management Controller (BMC) that supports two keyboard
controller-style interfaces (KCS) compliant with:
•
IPMI specification 1.5, revision 1.5
•
PICMG 2.9 specification
IPMI supports two IPMB busses via the J1 and J2 connectors.
Table 1-2: CP6012 Main Specifications (Continued)
CP6012
SPECIFICATIONS
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
