manualshive.com logo in svg

Kontron coolMonster/PM, User Manual

Share
Download
Kontron coolMonster/PM User Manual Download Page 75

 

25 24BAppendix B: BIOS Operation

 

Kontron User's Guide  
coolMonster/PM 

75

 

 

25.7

 

109B

Boot Menu and Utilities 

MultiBoot is a boot utility integrated in the PhoenixBIOS 4.0. The coolMONSTER/PM provides the 
MultiBoot XP version with integrated Boot First function. 

25.7.1

 

170B

MultiBoot XP 

MultiBoot XP comes with a complete new look of the Boot Device Priority submenu. This submenu is now 
separated into two sections: 

®

 

Boot Priority Order 

®

 

Excluded from Boot Order 

MultiBoot XP can display the setup menus by each kind of device type and arrange the boot priority order 
with any sequence of devices. MultiBoot XP meets the requirements of PC 98 and accommodates more 
devices that are bootable. It employs a boot scheme that is generic and flexible enough to boot from any 
current device. You can select your boot device in Setup, or you can choose a different device each time 
you boot by selecting your boot device in the Boot First function. 

An available bootable device can be easily switched between the two sections by just highlighting the 
device and then pressing <X>. To change the order, select the device to change and press <-> to 
decrease or <+> to increase priority. You can also choose between four default configurations for the 
boot order <1>-<4>. 

247B

Boot Priority Order 

This section shows eight configuration entries for up to eight devices that can be arranged in boot 
priority order (1: highest priority, 8: lowest priority). 

248B

Excluded from Boot Order 

This section shows all devices that are excluded from the boot order. Any device listed here will never be 
used as boot device and not appear in the Boot First function. 

The following table shows a list of supported devices: 

Device 

Description 

IDE 0 

Primary master IDE hard drive 

IDE 1 

Primary slave IDE hard drive 

IDE 2 

Secondary master IDE hard drive 

IDE 3 

Secondary slave IDE hard drive 

IDE CD 

IDE compatible CD-ROM drive 

Legacy Floppy Drives 

Standard Legacy Diskette Drive 

USB KEY 

USB Stick 

USB FDC 

USB Diskette Drive 

USB HDD 

USB Hard Drive and memory sticks that follow MMS specification 

USB CDROM 

USB CD-ROM Drive 

USB ZIP 

USB ZIP Drive 

USB LS120 

USB LS120 Drive 

PCI BEV 

Ethernet Controller on the PCI Bus with LAN Boot ROM 

PCI SCSI 

SCSI Controller on the PCI Bus with SCSI BIOS ROM 

Summary of Contents for coolMonster/PM



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands