Chapter 3 BIOS Configuration
50
CI5TTV User’s Manual
Used MEM base addr
This field allows the user to set the base address and block size of a
legacy (non-PnP) ISA card that uses any memory segment within the
C800H and DFFFH address range. If the you have such a card and are not
using an ICU (ISA Configuration Utility) to specify its address range,
select a base address from the six available options. During selection, the
“Used MEM Length” field will appear with the block size options. If you
have more than one legacy ISA card in your system that require the use of
this address range, you can increase the block size to either 8K, 16K,
32K or 64K. If you are using ICU to accomplish this task, leave “Used
MEM base addr” to its default setting of
N/A
.
StockCheck.com
