Starting Up
28
JRex-IBOX – User’s Manual
Starting Up
Power Cord Connection
The AC respectively DC power plug is located on the front side of the system.
The voltage of the power source must correspond to the
voltage value on the type label.
AC Connection
AC
On/Off switch
AC Power plug
DC Power plug
DC
On/Off switch
Fig. 19: AC power connection
Fig. 19a: DC power connection
1.
Connect the supplied AC power cord into the system AC power plug
(see fig.
19)
.
2.
Connect the other end of the AC power cord into a corresponding outlet.
Use a power cord suitable for the power supply in your country.
Make sure that the power supply (outlet) is properly grounded and
that the power cord is in perfect condition without any visible
damage. An ungrounded power supply is not permissible.
