Konrow City 55, User Manual

Page: 13 / 52

13
1. Inserting a SIM card
• Switch off the phone and remove the back cover. Insert the SIM card correctly in the space
provided for this purpose. You have 2 SIM card ports (SIM1 and SIM2). Be sure to respect the
direction of insertion of the cards.
• Then replace the back cover.
CAUTION:
The mobile data can only be used on one SIM card.
2. Inserting a MicroSD
• Switch off the phone and remove the back cover.
• Insert the memory card into the relevant slot.
• Then replace the back cover.
CAUTION:
Inserting or removing a SIM card or a MicroSD card requires the smartphone to be
completely switched off.
3. Installing and charging the battery
Charging the battery:
• To charge the battery, connect the USB câble (supplied) to the USB port of your smartphone
and the other end to the AC adaptor (supplied). Then connect the AC adaptor to a power outlet.
• The battery charge icon illuminates during charging and indicates the charge status.
• When the battery is fully charged, you can disconnect the USB câble from the device then
from the power outlet.
IMPORTANT:
• The smartphone is only recharged via its USB port.
•
The battery CITY55 be charged for at least 5 to 7 hours when first charged.
Note:
You can use the device when it is being charged. In this case, the battery may take longer
to charge fully.
4. Switching the smartphone on and off
To switch the smartphone on, press the On/Off button located on the side of the smartphone
for 3 seconds.
If the smartphone is switched on, press for less than a second on the button to put the device into
standby mode. Press it again to leave standby mode.
English