www.ks-power.de/en
|
4
GENERAL VIEW OF THE ATS UNIT
5
1. Power switch
2. Alarm buzzer
3. ATS mode switch
on the left - manual control
on the right - automatic control
4. Generator/Mains switch
(ATS manual control button)
5. Generator set manual control button
(manual start/stop)
6. Summer/Winter switch
on the left - summer mode (start time 10 seconds)
on the right - winter mode (start time 25 seconds)
7. Mains indicator
On - power is supplied
Off - no power
8. Load indicator at the output is
on - ATS unit is enabled
Off - ATS unit is disabled
9. Generator power indicator
On - generator power is supplied
Off - no generator power
10. Generator engine operating indicator
On - engine starts and works properly
Flashing - start error
Off - engine stopped
The ATS unit consists of a housing that can be mounted on a wall. The ATS unit is connected to the
generator set via a special control cable (included) and a power cable. The integrated clamping terminals
are used to connect the generator output, redundant electrical devices and AC mains.
1
2
6
4
5
3
7 8 9 10
The front panel of the ATS unit consists of control buttons and operation indicators.
Place the device so that the control panel is easily
accessible.
PLEASE NOTE!
Fig. 1
